200circles/sheet, Diameter =6mm 3M 9472LE 300LSE Strong Bonding Round Disc Circles for button, key, 0.13mm thick

Diameter =6mm ,Double Sticky Clear Pure Lamination Round Circles, 3M 9472LE 300LSE, Strong Bonding for button, key, 0.13mm thick
Description
Model: 9472LE
Adhesive Type:3M High Strength Acrylic Adhesive 300LSE
Thickness: around 0.13mm
Color: Clear
Diameter=6mm
Temperature range: from -40°F/-40°C to 300°F/148°C
Features:
Excellent bond to low surface energy substrates including powder coatings and plastics such as polypropylene (PP)v
High adhesion to metals and high surface energy materials, making it suitable for bonding dissimilar substrates
Adhesive provides excellent holding power and anti-lifting properties
Good resistance to industrial chemicals, consumer chemicals, moisture and humidity
Ideal solution for general purpose attachment and assemblies of a wide variety of materials
Meets a wide variety of automotive and OEM specifications

Recommended Applications
Bonding rough substrates such as textured plastics
Plastic to metal bonding
Consumer electronic device assemblies such as phones, tablets and wearable devices
Industrial electronic device assemblies such as workstations
Plastic assembly bonding in a variety of industries
Various assemblies in the automotive industry
Application and assembly of components on appliances
Medical equipment and device fabrication
General industrial applications such as trim attachment
Application Techniques

For maximum bond strength, the surface should be thoroughly cleaned and dried. Typical cleaning solvents are methyl ethyl ketone for metals or isopropyl alcohol for plastics. Carefully read and follow manufacturer’s precautions and directions for use when using cleaning solvents.

Bond strength can also be improved with firm application pressure and moderate heat, from 100°F (38°C) to 130°F (54°C), causing the adhesive to develop intimate contact with the bonding surface.

Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended for most pressure-sensitive adhesives because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.

Reference picture